Configuring Zend Server Settings in Zend Studio

Zend Server settings can be configured in Zend Studio in order to allow the appliance of Zend Studio functionality (Profiling, Debugging etc.) to Zend Server events, as well as allowing access to Zend Server's event list.

Zend Server configuration can be done either automatically, if the Zend Server is installed on the same machine on which Zend Studio is running, or manually through the PHP Servers Preferences page.

Automatically Configuring Zend Server

Zend Servers installed on the same machine as Zend Studio are automatically detected and configured in Zend Studio.

 

 

Instructions on how to complete a procedure

To automatically configure a Zend Server :

The auto detection is triggered when Zend Studio is launched.

 

  1. Ensure Zend Server is installed and running on the local machine.

  2. Open Zend Studio.
    A popup balloon will appear in the bottom-right corner of the window indicating that a Zend Server installation has been detected.

  1. Click the Add Server link to automatically configure the Local Zend Server. Alternatively, you can click the x icon to close the balloon or the 'Do Not Notify Again' link to disable the automatic detection.

The automatically configured Local Zend Server is added to the PHP Servers View and the PHP Servers Preferences page.

Note:

If you installed Zend Server after Zend Studio was launched, you can either restart Zend Studio or manually define Zend Server.

Configuring the Automatically Detected Zend Server

In order to access the Zend Server GUI and Zend Server Event List from Zend Studio, you will need to configure the Zend Server GUI password for the newly configured Zend Server by performing the following procedure.

 

 

Instructions on how to complete a procedure

To configure the automatically detected Zend Server :

  1. Open the PHP Servers preferences page by going to Window | Preferences | PHP | PHP Servers.

  2. Select the Zend Server from the list (by default, it will have been named Local Zend Server).

  3. Click Edit.

  4. Go to the Zend Server tab.

  5. In the Authentication category, enter the password used to access the Zend Server GUI.

  6. Click Apply and OK.

 

Manually Configuring Zend Server

This procedure explains how to manually define and configure a Zend Server in Zend Studio.

 

 

Instructions on how to complete a procedure

To manually configure a Zend Server:

  1. Open the PHP Servers Preferences page by going to Window | Preferences | PHP | PHP Servers.

  2. Click New to create a new server with Server Integration. or select an existing server and click Edit to add Server integration to a previously configured server.
    A "PHP Server Creation" dialog will open.

  3. Configure the server as described in the PHP Server Preferences page (enter the server's name and the URL of your document root).

Note:

If you are unsure of your Zend Server's document root, see the Zend Server FAQ to find out what your document root is.

  1. Click Next.

  2. If necessary, define Path Mapping. See Managing Path Maps for more information.

  3. Click Next.
    The "Zend Server Configuration" dialog is displayed.

  1. Mark the Enable Zend Server integration check-box to enable Zend Server integration functionality.

  2. Leaving the Use default check-box marked will create a URL in the format <server's document root>/ZendServer>. If necessary, unmark the check-box and edit the following:

  • URL Suffix - The suffix which should be added to the URL of your document root in order to browse to your Zend Server GUI.

  • Port number - Enter the port number you defined during Zend Server installation.
    See the Zend Server FAQ site for default port number settings.

  1. Enter the password for your Zend Server GUI.

  2. Click Next to configure Tunneling settings or Finish to create your server.

Your Zend Server is added to the Zend Server list and will allow you to use Zend Server integration features.
VideosGet StartedTutorialsTips and TricksSupport

Copyright © 2016 Zend Technologies