-
Log on to the IBM i system with a user profile of *SECOFR user class with all special authorities.
-
Stop Zend Server Subsystem using Zend Server Setup Menu
- GO ZENDSVR6/ZSMENU ->option 5 ->option 2 -
Remove ZENDSVR6 library from the library list by exiting Zend Server Setup menu
Press twice function key F3 -
Create SAVF files in QGPL library for PTF save file:
- CRTSAVF FILE(QGPL/z6zs000X) -
Transfer the PTF by binary FTP to the SAVF PTF file in QGPL.
This can be done by executing the following steps: -
Verify that FTP is running on your IBM i system by running the following command and looking for 'FTP' or '21' in the Local Port column:
NETSTAT *CNN -
Open a command prompt and change directory to the directory that contains the files you extracted from the ZIP file.
-
Run the FTP command, specifying the name of your i5/OS system. e.g:
ftp IBM i_system_name/TCP address -
If requested, enter a valid user profile and password.
Enter the bin command to specify a binary transfer
- bin
Change directory to QGPL
- cd qgpl -
Transfer the save file to the IBM i system by running the following command:
- put z4zs000X.savf z4zs000X -
Load PTF by running:
- LODPTF LICPGM(6ZSVRPI) DEV(*SAVF) SAVF(QGPL/z6zs000X) -
Apply PTF by running:
- APYPTF LICPGM(6ZSVRPI) SELECT(6ZS000X) -
Start the Zend Server Subsystem using the Zend Server Setup Menu
- GO ZENDSVR6/ZSMENU ->option 5 ->option 1
To
check if the PTF was applied
- GO ZENDSVR6/ZSMENU ->option 2
