Version
Zend Server 6.3
Zend Server Online Help 6.3v02
© 1999-2014 Zend Technologies, Ltd. All rights reserved.
The following error message appears in Zend Server for IBMi when using the Zend Studio Diagnostics that are available from the Overview | Events | Event Details page:
"Failed to communicate with Zend Studio. Go to the online help's 'troubleshoot' section to find out how to fix the connection"
This error message can be caused by several possible problems:
When running diagnostics on an alternate server:
The Zend Debugger is not running on the alternate
server.
Solution - Make sure that the Zend Debugger is running and available
on the alternate server. In the UI, go to Configurations
| Components, and check that the Zend Debugger is loaded.
The connection parameters in for the Zend Monitor component on the Configurations | Components pageare not the same as the settings in Zend Studio's
Debugger preferences. (IP address, Port and if you are using SSL).
Solution - Check the settings in Zend Studio for Eclipse. For
instructions go here
and make sure the Zend Studio for Eclipse debug settings are the same
as defined in Zend Server for IBMi
.
The Zend Studio IP address is not allowed to debug
on the alternate server.
Solution - In the UI, go to Configurations
| Components and select the Zend Debugger component from the Components list. Make sure
that the Zend Studio IP address is an allowed host to debug - the setting should
be in the alternate server's Zend Server for IBMi
UI under Configurations
| Components | Zend Debugger.
Version
Zend Server 6.3
Zend Server Online Help 6.3v02
© 1999-2014 Zend Technologies, Ltd. All rights reserved.