Zend Server PTF Upgrade for PHP 5.2

1. Log on to the IBM i system with a user profile of *SECOFR user class with all special authorities.

2. 1. Stop Zend Server Subsystem using Zend Server Setup Menu  
      - GO ZENDSVR/ZSMENU ->option 5 ->option 2

   2. Remove ZENDSVR library from the library list by exiting Zend Server Setup menu
      Press twice function key F3

   3. Create SAVF files in QGPL library for PTF save file:
      - CRTSAVF FILE(QGPL/Z4ZS000X)

2. Transfer the PTF by binary FTP to the SAVF PTF file in QGPL.
   This can be done by executing the following steps:

3. 1. Verify that FTP is running on your IBM i system by running the following command and looking for 'FTP' or '21' in the Local Port column:
      - NETSTAT *CNN

   2. Open a command prompt and change directory to the directory that contains the files you extracted from the ZIP file.

   3. Run the FTP command, specifying the name of your i5/OS system. e.g:
      ftp IBM i_system_name/TCP address

   4. If requested, enter a valid user profile and password.
      Enter the bin command to specify a binary transfer
      -  bin
      Change directory to QGPL
      - cd qgpl

   5. Transfer the save file to the IBM i system by running the following command:
      - put z4zs000X.savf z4zs000X

3. Load PTF by running:
   - LODPTF LICPGM(2ZSVRPI) DEV(*SAVF) SAVF(QGPL/z4zs000X)

4. Apply PTF by running:
   - APYPTF LICPGM(2ZSVRPI) SELECT(4ZS000X)

5. Start the Zend Server Subsystem using the Zend Server Setup Menu
   - GO ZENDSVR/ZSMENU ->option 5 ->option 1

To check if the PTF was applied
- GO ZENDSVR/ZSMENU ->option 2

1. Log on to the IBM i system with a user profile of *SECOFR user class with all special authorities.

2. 1. Stop Zend Server Subsystem using Zend Server Setup Menu
      - GO ZENDSVR/ZSMENU ->option 5 ->option 2

   2. Remove ZENDSVR library from the library list by exiting Zend Server Setup menu
      Press twice function key F3

2. Remove PTF by running:
    - RMVPTF LICPGM(2ZSVRPI) SELECT(4ZS000X)

 To start the Zend Server Subsystem using the Zend Server Setup Menu  

   - GO ZENDSVR/ZSMENU ->option 5 ->option 1

Related Links: